DURA-SHIELD ™ 2000 AND 3000: BLAST RESISTANT AUTOMATIC SLIDING DOOR SYSTEM

dura-blast-2000-3000

The Dura-Shield was developed in partnership with Insulgard® Security Products to provide protection from blast attacks by complying with DOD UFC Blast Code UFC 4-010-01. It provides solid performance, security and safety in a single system. It is ideal for buildings where sliding automatic entrances are required to protect high-risk areas.

FEATURES AND BENEFITS

  • Blast resistant glass meeting UFC 4-010-01
  • Door panels constructed of heavy-duty aluminum-extruded 2 ½” x 6″ (63.5mm x 152.4mm) framing
  • Door stiles assembled with threaded rods and clips, providing additional strength

All door packages are custom manufactured to fit your job requirements up to ¼” increments. For sizes greater or smaller than typical, contact AUTOMATIC DOORS COMPANY LIMITED.

DESIGN: Bi-Part, Single Slide or Swing

BREAKOUT: None

HEADER SIZE:11” (279mm) High x 8 7/8” (227mm) Deep

MAXIMUM SIZES:Single Slide: 10’ 0” (3.0m) x 8’ 0“ (2.4m) | Bi-Part: 14’ 0” (4.3m) x 8’ 0“ (2.4m)

JAMB DIMENSION: 1 3/4” x 4 1/2” Option: 1 3/4” x 6”

TYPICAL DOOR PANEL WEIGHT: Up to 500 pounds (227kg) each

POWER REQUIRED: 120 VAC, 50/60 HZ, 5 Amps Minimum

DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Toothed belt | OPTION: Twin 1/4 HP DC Gear Driven Motors

CONTROLS: Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro

CONTROLLER: Microprocessor Based, Safety Logic

SENSORS: 2 for Motion (Switchable Between Uni-directional and Bi-directional) and 1 Stan-Guard® and Doorway Holding Beam for Safety | OPTIONAL: Mats, Wallplates, Radio Control

TEMPERATURE RATING: -30F to 130F

CODES AND STANDARDS: UL®, cUL, ANSI A156.10*, GSA Classification C Performance 3a or 3b, UFC 4-010-01 – Department of Defense Code

* Due to extreme forces during a blast event, our Blast product complies with all facets of ANSI 156.10 except emergency egress breakaway. Please consider alternate egress routes when designing your life safety egress plan. Final use of this project must be approved by local Fire Marshall.

Due to the unique nature of this product, we highly recommend a consultation during the design process to ensure the utmost accuracy.